| 数控剪板机的数控系统为什么要空运转有什么说法 |
| source： hits：483date：2022/11/9 9:14:42 |
| Numerical control plate shears are now among the domestic machine tools that are relatively excellent in foreign development. In fact, numerical control plate shears and our common traditional plate shears have more functions of numerical control. Does the CNC system need maintenance? Will long-term non maintenance affect the use of CNC system? In fact, when the CNC system is not used for a long time, the manufacturer should properly do some maintenance. CNC plate shearing machine In order to better improve the utilization rate of the NC system and reduce the failure of the NC system, we should use the CNC machine tool at full load when using it. And don't leave it idle for a long time. Many people may think that there is something wrong with me not having to protect it, but in fact, for some reason. When the CNC system is not used for a long time, it will cause damage to the CNC system. Therefore, in order to avoid damage to the CNC system, two points should be noted. One is to take the brush out of the DC motor. In order to avoid chemical corrosion, the second is to power on the NC system frequently, especially in the rainy season when the ambient humidity is high, so that the NC system can run empty. In fact, for the numerical control plate shears, their numerical control system is the most important part of the whole machine body, so we must do a good job in the maintenance of the bending machine. Please pay attention to our official website for more tips on the numerical control plate shears. |
| 【Refresh Page】【Add to Favorites】【打印此文】 【Close】 |
| 上一篇：如何更好的保养剪板机 下一篇：没有了 |
Hotline：
18252870666