保养摆式剪板机需从哪几方面入手 |
source: hits:389date:2022/11/12 9:13:58 |
Steps and methods for maintenance of hydraulic swing plate shears: (1) Regularly check and repair switches, fuses and handles to ensure their reliable operation. (2) Regularly check whether the V-belt, handle, knob and key are damaged. If they are seriously worn, they should be replaced in time and reported to the spare parts for supplement. (3) The lubricating oil in the motor bearing shall be replaced and filled regularly, and the electrical equipment shall be checked regularly for normal, safe and reliable operation. (4) It is strictly forbidden for non personnel to operate the equipment, and people must leave the machine and stop. (5) Before each startup, add lubricating oil regularly, fixedly and quantitatively according to the requirements of the lubrication chart. The oil should be clean and free of sediment. (6) Operate in strict accordance with the operating procedures. (7) The machine tool must always be kept clean, and part of the unpainted anti rust grease must be kept clean. (8) . After work for * minutes every day, lubricate the machine tool and scrub and clean the machine tool. The swing plate shears are in circular motion, and it is quite difficult to make the circular blade. Generally, the blade is used to make sizing block compensation, so the gap obtained is not very good, and the plate cut is not very ideal Because of the arc movement, the blade can not be made into a rectangle, but should be made into an acute angle, so the force on the blade is not ideal, and the blade is also severely damaged. |
【Refresh Page】【Add to Favorites】【打印此文】 【Close】 |
上一篇:选购摆式剪板机需了解的要点 下一篇:如何更好的保养剪板机 |